Three Reasons To Identify Why Your Fiat Panda Key Fob Replacement Isn't Working (And How To Fix It)
Reasons Your Fiat 500 Key Fob Won't Work
A fiat 500 key fob is a convenient method to open the doors and begin the car. There are a myriad of reasons why the fob may stop working. This could be due to a dead coin battery damaged receiver module, water damage issues, and interfering.
This listing is for a NEW replacement Fiat Flip Key Remote that appears similar to the Ilco brand. It has to be professionally programmed (click here to search for local automotive locksmiths). This remote includes trunk, lock and unlock buttons.
Dead Coin Battery
The most common reason your 500 key fob doesn't work is the battery is dead. Key fobs of today have only a limited range of operation and must be within just a few inches of the vehicle to work. If you are not within your vehicle and you push the keyfob button it will not respond, and display the message "Key Fob Not Detected".
If this happens, replace the battery in the coin cell (Part number CR2032) with a fresh one from a reputable manufacturer such as Panasonic, Duracell, or Energizer. You can typically find them in your local hardware store or online.
After you've replaced the coin cell battery You can test it by standing near your Fiat 500 and pressing the buttons. The parking lights should flash and the key fob should operate the lock and unlock switch.
If the fob's key doesn't function after replacing the battery, it might have water damage that stops it from communicating with the receiver module inside your vehicle. Water damage can happen in many ways, including the simple splash or submerging the key fob into saltwater at the beach. If you believe your fob was exposed to water, place it in a bag of rice to draw out the moisture. If this isn't working, you'll need to have the fob changed by an auto locksmith or dealer.
Water Damage
While the fob comes with rubber seals to keep water from the chip's electronic circuit, submerging it in the ocean or washing it in a machine can cause water damage. Saltwater can cause the circuit board to become shorted and eventually fail. In fiat 500 key replacement thekeylab.co.uk that you let your fob get wet, it's not an ideal idea but if you accidentally drop it in a cup of water or do not remember to take it out of your pants pocket before running the washer, don't give up hope.
First remove the battery from the fob. Clean the electronic chip using isopropyl or a similar product and then dry it completely before replacing the battery. Check the fob again to verify if it's functioning. If the key doesn't function, it may have to be reset. This is typically done by a dealer or professional auto locksmith.
If the key you have is older and has not been programmed for your car You will need to replace it completely. A professional locksmith for automotive can complete this simple process. The locksmith will have to cut the key to match the ignition of your vehicle. They'll also have to reprogram the fob to your car's system. This is an affordable and quick process that can be completed within the same day.
Receiver Module Issues
The 500 key fob you have may be inoperable because it's out of range. The remote has a maximum range of 30 feet. Therefore, should you be too far away from your vehicle it won't be able to respond to your commands. It can be solved by moving it closer to your vehicle until it begins responding.
If your fob doesn't work after you replace the coin battery, also known as a "button", "watch" or "button" It could be due to a problem with the circuit board inside. Reprogramming your fob can resolve the issue. You can find directions on how to do this on the majority of automobiles by searching YouTube or reading the owner's manual.
It is possible to replace the clips made of metal that hold the coin batteries in their place. If they loose tension, it may prevent your battery from being properly seated and cause your remote to malfunction.
In rare instances, the fob can become out of connection with your vehicle as a result of software or hardware problems. This can cause a major trouble, but you could frequently fix this issue by visiting an auto locksmith to have them reprogram your fob for you. In certain instances the software may require reinstallation into your body control modules.
Interference
In addition to a dead battery on a coin the key fob could not be able to transmit or receive the signal due to interference. This can happen when the key fob is close to the radio transmitter (cell phones, radar detectors) or another source of electromagnetic radiation. Other reasons why the key fob could not function may be a lack of connection to the buttons and internal chip, or water damage.
If the key fob stopped working one day out of the blue and you've tried everything you can at home to fix it e.g. battery replacement, reprogramming and using the spare key fob, you could have a malfunctioning receiver module on your 500. The receiver module, which is located under the dashboard, picks up radio frequency signals from your key fob. It transforms the signals into electronic commands that are then read by the vehicle.
Fortunately, there's an easy method to reset every single system on board in your 500, including the key fob. Disconnect the battery for 15 minutes by removing first the negative cable and then the positive cable. Then reconnect the battery. This will remove any residual electricity and restart the car's computer system, which can help you get your key fob working again. If the issue persists, you should seek the advice of an expert technician. They'll be able to determine the exact cause of your problem.